Supplied free of charge with orders of 90,000 labels or more
Open Data Pricing Guns use specific Open Data Ink Rollers depending on the model of Open Data Pricing Gun. We supply Ink Roller for Open Data 3 Line Pricing Guns. The Open Data three-line model pricing guns use a 32mm roller on a 40mm armature in 3 line Open Data Pricing Guns.
If you are in any doubt about which ink roller you should buy, please call us so we can select the correct ink roller for you. These ink rollers will fit the following pricing guns we supply:
These ink rollers will not fit any Open Data one or two line pricing guns such as the Open C6, C8, S10, C17 or C20 or their variants.
To fit the ink roller we recommend wearing nitrile or latex gloves to keep ink off your fingers then follow these simple steps:
The Open Data Price Gun ink roller is a foam cylinder soaked in a viscous UV resistant ink. When the user presses the lever of the price gun, the ink roller rotates as the print head moves across the face of the ink roller. This applies a thin layer of ink to the characters on the print head bands prior to the impression on the label.
The design of the ink roller for all Open Data 3 Line pricing guns means that the ink roller dispenses a little ink on the print head bands every time a label is used. As a result of this process, the output of the price gun should mean the labels are uniform in presentation at all times until the ink roller is exhausted.
Each ink roller should last for around 15,000 impressions before the print output deteriorates.
Order online or if you are in any doubt, call us on 01332 864895. Unfortunately, if you are not buying labels we must respectfully ask that you pay for your item before delivery as it is below our minimum credit order value.